Price excludes freight.
Free Skid Configuration for Trailer Mounting
The Super Max12860 AF commercial industrial oil heated fired pressure washer is an electric pressure washer with an oil fired heating system that can be used independently as a cold water pressure washer or hot water pressure washer and offers a higher flow rate (5 GPM) and pressure (3000 psi) than the 12840 AF.
As is standard on all 12000 AF series models, the 12860 AF includes Daimer's phosphatizing system for the pre-treating of metal surfaces to prevent rust and corrosion and to prepare surfaces for the application of paint primer of powder coating. Daimer uses only the highest quality stainless steel in the various components, including: the downstream injector, steel fittings and parts, and the dual lance wand. For added durability, the phosphatizing system uses downstream injection in which the chemical has minimal contact with components that are easily protected against corrosive attack.
The dual lance wand is comprised of heavy-duty stainless steel and contains a high-pressure nozzle and low-pressure nozzle. By opening and closing the crossover valve, the water flow is directed through either nozzle, not both at the same time.
The Super Max 12860 AF can be purchased with either no. 1 or no. 2 heating oil, diesel, or kerosene heating, can be configured with wheels for added mobility, and can also be purchased with two gun operation, like other 12000 AF series models, . This model is ideal for those requiring a powerful system for more difficult applications or those involved in powder coating and require a phosphatizing system.
Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 415V, 440-480V, and 575V; single and three phase; 50 or 60 Hz. Please contact us for pricing.
Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited) |
|
Dual Lance Wand with crossover valve | 1 |
0º (Blast) Nozzle (not shown) | 1 |
15º Nozzle (not shown) | 1 |
25º Nozzle (not shown) | 1 |
40º Nozzle (not shown) | 1 |
50' High Pressure Hose (not shown) | 1 |
Grease and oil intended for use in industrial areas are usually stored in large oil drums. After the oil has been used, it is necessary to degrease the drums properly before refilling them with oil. Generally, such tasks involve using heavy-degreasing chemicals and scrubbing, to ensure complete elimination of oil deposits. However, this is a time-consuming technique that also demands lots of effort from cleaning professionals. For this reason, it is a great idea to switch to hot water pressure washers.
Steam pressure washers feature just the right attributes needed to get oil drums clean and oil-free. The high temperatures of these truck mounted pressure washers help dissolve tough deposits of oil very speedily. The high pressure levels of these truck mounted pressure washer machines help towards the complete removal of the dissolved oil particles, leaving the oil drums absolutely clean. Using a truck mounted pressure washer greatly simplifies such industrial degreasing applications.
For industrial pressure washers capable of simplifying industrial maintenance jobs, check out the Super Max12860 AF from Daimer®. Such electric pressure washers heated by kerosene or diesel generate hot water or cold water at pressure levels of 3000 psi and flow rates of 5 gpm. For added mobility, these commercial pressure washers come with wheeled configurations. Just like all other industrial pressure washers in the AF series, this version also comes with a phosphatizing system. It makes the commercial pressure washers capable of pre-treating metal surfaces by removing rust, corrosion, and other heavy deposits from oil drums.
© 2023 DAIMER Industries. All Rights Reserved.
so That You Can Get Discount Coupons, Promos, Company News and More!