The Super Max ® 15400 is a stationary, tri-mode electric Steam Natural Gas, Propane, Oil Heated Pressure Washer that offers cold water, hot water, and steam pressure washing with steam temperatures up to 330º F. Like the 15200, the 15400 is an electrically powered unit available with: no.1 or no. 2 heating oil, diesel, kerosene, natural gas, or propane heating. The 15400, however, offers a higher flow rate (3 GPM) and lower pressure (700psi) than the 15200 and is ideal for industrial/commercial
applications that would benefit from the addition of a permanent pressure washing system, but that need a lower pressure than that offered by the 15200. Available options include: two gun operation.
Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 400V, 415V, 440V, 480V, and 600V; two and three phase; 50 or 60 Hz. Please contact us for pricing.
Commercial/Industrial
Warranty1 year (limited)`Water Pump Warranty3 years (limited)Motor/Engine Warranty2 years (limited)
Product Specifications
Pressure
700 PSI
Adjustable Pressure
N/A
Flow Rate
3 GPM
Standard Power Method
electric: 120V, single phase, 60 Hz
Optional Power Methods
(call for pricing) 120V, single phase, 50 Hz; 230V, single phase, 50 or 60 Hz; 230V three phase, 50 or 60 Hz; & 440V, three phase, 50 or 60 Hz
Motor Size
heavy duty 1.5 HP - NEMA
Gasoline Capacity
N/A
Ignition System
electronic direct spark
Power cords
1
Heating Method
no.1 or no. 2 heating oil; diesel; kerosene; natural gas (requires natural gas line); or propane (customer provides vapor withdrawal cylinder)
Heating Fuel Capacity
9 gallons (heating oil, kerosene, or diesel)
Temperature Options
cold, hot, wet steam
Temperature Hot
180 º F - 220 º F
Steam Temperature
up to 330º F
Heater Exchange Coil
heavy duty schedule 80 Heating Coil
Heater Response Time
converts cold water to hot water in approximately 30 seconds
Operating Time
continuous use
Pump Drive Method
direct drive
Chemical Infusion
yes, high pressure injection
Wand Included
durable 3' trigger wand with quick disconnect
Nozzles Standard
0º (blast), 15º, 25º, 40º, steam nozzles
Pressure Hose
25' high pressure steam hose
Pressure Hose Options
additional/customizable lengths available
Dimensions
52"w. x 23"d. x 50"h.
Weight
950 lbs
Housing
powder-coated steel, high gloss, chip/chemical resistant
