The Super Max ® 15500 is a stationary, tri-mode electric pressure washer offering steam temperatures up to 330º F and hot water temperatures up to 220º F, like the 15200 and 15400. The Super Max 15500 also offers the same high pressure injection, for the addition of cleaning chemicals, as other 15000 series models. The Super Max ® 15500, however, offers a flow rate of 4 GPM at a pressure of 1000 psi. This model is ideal for those requiring the permanent addition of a pressure washer offering a
mid-range pressure, but a flow rate higher than the 2 GPM flow rate available with the Super Max ® 15200. Heating options are the same as other 15000 series models (no.1 or no. 2 heating oil; diesel; kerosene; propane; and natural gas) and available options include: two gun operation.
Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 400V, 415V, 440V, 480V, and 600V; two and three phase; 50 or 60 Hz. Please contact us for pricing.
Commercial/Industrial
Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited)
Product Specifications
Pressure
1000 psi
Adjustable Pressure
N/A
Flow Rate
4 GPM
Standard Power Method
electric: 230V, single phase, 60 Hz
Optional Power Methods
(call for pricing) 230V, single phase, 50 Hz; 230V three phase, 50 or 60 Hz; & 440V, three phase, 50 or 60 Hz
Motor Size
heavy-duty 3 HP - NEMA
Gasoline Capacity
N/A
Ignition System
electronic direct spark
Power cords
1
Heating Method
no.1 or no. 2 heating oil; diesel; kerosene; natural gas (requires natural gas line); or propane (customer provides vapor withdrawal cylinder)
Heating Fuel Capacity
9 gallons (heating oil, kerosene, or diesel)
Temperature Options
cold, hot, wet steam
Temperature Hot
180 º F - 220 º F
Steam Temperature
up to 330º F
Heater Exchange Coil
heavy duty schedule 80 heating coil
Heater Response Time
converts cold water to hot water in approximately 30 seconds
Operating Time
continuous use
Pump Drive Method
direct drive
Chemical Infusion
yes, high pressure injection
Wand Included
durable 3' trigger wand with quick disconnect
Nozzles Standard
0º (blast), 15º, 25º, 40º, steam nozzles
Pressure Hose
50' high pressure steam hose
Pressure Hose Options
additional/customizable lengths available
Dimensions
52"w. x 23"d. x 50"h.
Weight
1010 lbs
Housing
powder-coated steel, high gloss, chip/chemical resistant
