Price excludes freight.

The Super Max® 15500 WS is a stationary, electric wet sand blaster pressure washer that can be heated by natural gas, propane or oil. Like all Super Max® 15000 WS models, the 15500 WS has the tri-mode ability to function independently as a cold water, hot water, or steam pressure washer with temperatures up to 330ºF. The high flow rate (4 GPM) and mid-range pressure (1000 psi) make the 15500 WS the ideal machine for industrial facilities requiring a permanent pressure washer addition with multi-use functionality and wet sandblasting capabilities and optional two-gun operation configuration.

The included wet sand blaster system is an effective method of removing rust, corrosion, paint layers or heavy deposits from a variety of metal surfaces. To do this, the system forces high-pressure water carrying sand grit across the surface at high speeds to smooth and sand the surfaces down to shiny bare metal. Using water, this system is much safer than compressed air sandblasting and does not require the user to wear protective clothing. For use as a wet sand blaster, this pressure washer must be used in cold water mode.

The wet sand blaster is comprised of the highest quality components. The metal sand point draws the sand directly from the container into the 15' flexible sand pickup tube that carries the sand to the head where it is mixed with high-pressure washer. The mixture exits the pressure washer through the head through a special round nozzle. An added benefit is the included proportioning valve on the head that can be used to further adjust the flow of sand and water.

Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 400V, 415V, 440V, 480V, and 600V; two and three phase; 50 or 60 Hz. Please contact us for pricing.