The Super Max® 7000 WS is a powerful industrial commercial wet sand blaster pressure washer that can act independently as a cold water, hot water, and steam pressure washer. This versatile machine offers a pressure of 1000 psi and flow rate of 2.5 GPM and is capable of reaching high steam temperatures up to 330ºF.

When used in cold water mode, this pressure washer machine can be used to operate the wet sand blaster system included. For use as a wet sand blaster, this pressure washer must be used in cold water mode. Normal pressure washing removes contaminants from a surface, but this wet sand blaster pressure washer actually removes a layer of material from a surface and can remove rust, corrosion, paint layers or heavy deposits down to shiny bare metal.

The wet sandblasting kit that comes standard on all Daimer Super Max® WS wet sand blaster pressure washer machines includes a special venturi head, flexible 15' sand pickup tube, and sand point, all of which are comprised of the highest quality components. The metal sand point tube draws sand directly from the container into the hose where the suction created by the high-pressure water flows draws the sand into the head and mixes it with the water. The high-pressure water carrying the sand grit leaves through the special nozzle and carries the sand across the surface to be blasted.

The 7000 WS wet sand blaster system can be used with a wide range of sand grit sizes as well as different medias, including baking soda and small plastic pellets. This wet sand blaster pressure washer machine is ideal for smaller spot cleaning of metal surfaces, as it uses high pressure water instead of compressed air. This method is a much safer way of sandblasting and requires no special breathing protection, like that required by compressed air sandblasting.