Daimer Industries, 16 Tower Office Park, Woburn, Massachusetts 01801 USA. Phone: 781.393.4900. Fax: 781.932.1960
Copyright 2011 Daimer. All rights reserved
The Super Max™ 15900 is the most powerful pressure washer in the 15000 series. This stationary, tri-mode electric pressure washer offers the same features and heating options (no.1 or no.2 heating oil, diesel, kerosene, natural gas, or propane) as the other 15000 series models, but with a higher flow rate (5 GPM) and pressure (3000psi). Two gun operation is available on the Super Max™ 15900. The Super Max ® 15900 is ideal for industrial applications that require the permanent
addition of a powerful electric pressure washer for difficult cleaning applications and those that require wet sandblasting capability or phosphatizing capability, especially those involved in metallic powder coating.
Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 415V, 440-480V, and 575V; single and three phase; 50 or 60 Hz. Please contact us for pricing.
Product Specifications
Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited)
Pressure
3000 psi
Flow Rate
5 GPM
Temp. Options
cold, hot, wet steam
Steam Temp.
up to 330ºF
Hot Water Temp.
180ºF - 210ºF
Standard Power Method
electric: 220V-240V, three phase, 60 Hz
Optional Power Methods
(call for pricing) 220V-240V three phase, 50 or 60 Hz; & 440V, three phase, 50 or 60 Hz
Motor Size
heavy duty 10.0 HP - NEMA
Minimum Generator Size
N/A
Gasoline/Diesel Fuel Capacity
N/A
Ignition System
electronic direct spark
Power Cords
1
Heating Method
no.1 or no. 2 heating oil; diesel; kerosene; natural gas (requires natural gas line); or propane (customer provides vapor withdrawal cylinder)
Heating Fuel Capacity
9 gallons (heating oil, kerosene, or diesel)
Heater Exchange Coil
heavy duty schedule 80 heating coil
Heater Response Time
converts cold water to hot water in approximately 30 seconds
Operating Time
continuous use
Pump Drive Method
direct drive
Chemical Infusion
yes, high pressure injection
Wand Included
durable 3' trigger wand with quick disconnect
Nozzles Standard
0º (blast), 15º, 25º, 40º, steam nozzles
Pressure Hose
50' high pressure steam hose
Pressure Hose Options
additional/customizable lengths available
Dimensions
52"w. x 23"d. x 50"h.
Weight
1120 lbs
Housing
powder-coated steel, high gloss, chip/chemical resistant
