Daimer Industries, 16 Tower Office Park, Woburn, Massachusetts 01801 USA. Phone: 781.393.4900. Fax: 781.932.1960
Copyright 2011 Daimer. All rights reserved
The Super Max™ 15200 is a stationary, tri-mode steam natural gas, propane or oil heated fired steam electric pressure washer that can be independently used as a cold water pressure washer, hot water pressure washer, or steam pressure washer. The Super Max 15200 offers a flow rate of 2 GPM at a pressure of 1000 psi. High pressure injection allows for the addition of cleaning solutions to enhance cleaning power for specific applications. This electric powered pressure washer is available
with: no.1 or no. 2 heating oil, diesel, kerosene, natural gas, or propane heating and two gun operation is an available option. This introductory 15000 series pressure washer is ideal for industrial applications requiring a powerful pressure washer as a stationary addition to their facilities, but that do not need the higher flow rates and pressure afforded by other machines.
Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 415V, 440-480V, and 575V; single and three phase; 50 or 60 Hz. Please contact us for pricing.
Product Specifications
Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited)
Pressure
1000 psi
Flow Rate
2 GPM
Temp. Options
cold, hot, wet steam
Steam Temp.
up to 330ºF
Hot Water Temp.
180ºF - 210ºF
Standard Power Method
electric: 120V, single phase, 60 Hz
Optional Power Methods
(call for pricing) 120V, single phase, 50 Hz; 230V, single phase, 50 or 60 Hz; 230V three phase, 50 or 60 Hz; & 440V, three phase, 50 or 60 Hz
Motor Size
heavy duty 1.5 HP - NEMA
Minimum Generator Size
N/A
Gasoline/Diesel Fuel Capacity
N/A
Ignition System
electronic direct spark
Power Cords
1
Heating Method
no.1 or no. 2 heating oil; diesel; kerosene; natural gas (requires natural gas line); or propane (customer provides vapor withdrawal cylinder)
Heating Fuel Capacity
9 gallons (heating oil, kerosene, or diesel)
Heater Exchange Coil
heavy duty schedule 80 heating coil
Heater Response Time
converts cold water to hot water in approximately 30 seconds
Operating Time
continuous use
Pump Drive Method
direct drive
Chemical Infusion
yes, high pressure injection
Wand Included
durable 3' trigger wand with quick disconnect
Nozzles Standard
0º (blast), 15º, 25º, 40º, steam nozzles
Pressure Hose
50' high pressure steam hose
Pressure Hose Options
additional/customizable lengths available
Dimensions
52"w. x 23"d. x 50"h.
Weight
950 lbs
Housing
powder-coated steel, high gloss, chip/chemical resistant
