The Super Max™ 15400SP is a stationary, electric, natural gas, propane, or oil heated wet steam pressure washer. This 100% wet steam pressure washer boasts temperatures up to 330º F and features Super-HOT®(Super High-Temperature Optimized Technology®). Like the 15200SP steam pressure washer equipment, the 15400SP is an electrically powered unit available with: no.1 or no. 2 heating oil, diesel, kerosene, natural gas, or propane heating.
The 15400SP, however, offers a higher flow rate (3 GPM) and lower pressure (700psi) than the 15200SP steam pressure washer machine and is ideal for industrial/commercial applications that would benefit from the addition of a permanent steam pressure washer system, but that need a lower pressure than that offered by the 15200SP. Available options include: two gun operation.
Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 400V, 415V, 440V, 480V, and 600V; single and three phase; 50 or 60 Hz. Please contact us for pricing.
Commercial/Industrial
Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited)
Product Specifications
Pressure
700 psi
Flow Rate
3 GPM
Temp. Options
N/A - wet steam standard
Steam Temp.
up to 330ºF
Hot Water Temp.
N/A
Standard Power Method
electric: 120V, single phase, 60 Hz
Optional Power Methods
(call for pricing) 120V, single phase, 50 Hz; 230V, single phase, 50 or 60 Hz; 230V three phase, 50 or 60 Hz; & 440V, three phase, 50 or 60 Hz
Motor Size
heavy duty 1.5 HP - NEMA
Minimum Generator Size
N/A
Gasoline/Diesel Fuel Capacity
N/A
Ignition System
electronic direct spark
Power Cords
1
Heating Method
no.1 or no. 2 heating oil; diesel; kerosene; natural gas (requires natural gas line); or propane (customer provides vapor withdrawal cylinder)
Heating Fuel Capacity
9 gallons (heating oil, kerosene, or diesel)
Heater Exchange Coil
heavy duty schedule 80 Heating Coil
Heater Response Time
converts cold to wet steam in approximately 30 seconds
Operating Time
continuous use
Pump Drive Method
direct drive
Chemical Infusion
yes, high pressure injection
Wand Included
durable 3' trigger wand with quick disconnect
Nozzles Standard
steam nozzle
Pressure Hose
25' high pressure steam hose
Pressure Hose Options
additional/customizable lengths available
Dimensions
52"w. x 23"d. x 50"h.
Weight
950 lbs
Housing
powder-coated steel, high gloss, chip/chemical resistant
