Daimer Blog

July 28, 2015

Super Max 8950C-840

Super Max 8950C-840Powered by an 18HP engine, the Super Max 8950C-840 is the most powerful gas-powered cold water pressure washer in our 8900 series. This model deliver a pressure of 5000 pounds per square inch and a flow rate of 4.5 gallons per minute for superior cleaning power in a variety of commercial and industrial applications. Optional wet sandblasting and dual gun operation are available upon request.

The Super Max 8950C-840 is ideal for those tasks requiring power and portability. The 2-gallon diesel-powered engine with electronic ignition means there are no cords to contend with and no electrical outlets to stay close to. This pressure washer cleaning machine is perfect for jobs that need high pressure but not necessarily hot water or steam. The 8950C-840 is capable of handling water up to 180ºF. This feature is optional upon request as well.

The Super Max 8950C-840 cold water pressure washer features continuous use operation and includes a low-pressure chemical injection to make tough cleaning jobs easier. The durable 3-foot trigger wand with quick disconnect and the 25-foot high-pressure hydraulic hose that comes standard with this model are perfect for cleaning hard to reach places with ease.

This powerful industrial pressure washer is mounted on two wheels and has a large handle for ease in maneuvering, but is trailer-mountable when the wheels are removed.

Cleaning Concrete with the Super Max 8950C-840 Cold Water Pressure Washer

One of the most common uses for a pressure washer such as the Super Max 8950C-840 is cleaning concrete. Many industries tend to soil the paved surfaces in and around their buildings, and a pressure washer is the ideal method of cleaning these stains and grime.

Most professional power washing contractors agree that a pressure washer delivering at least 3000 PSI and a 4 GPM flow rate is suitable for almost all commercial and industrial cleaning jobs. The Super Max 8950C-840 falls well within these specs and is perfect for most applications, and especially for effectively cleaning concrete.

When cleaning concrete, pressure is the first area of consideration. The higher the pressure, the better the machine cleans. Next is flow rate. The rate at which the water flows out of the nozzle determines how fast you’ll be able to work. You can blast mud, grime and debris with all the pressure in the world, but if your flow rate is low, you’ll spend all day cleaning areas like sidewalks and parking lots. With pressure levels at 5000 PSI and a flow rate of 4.5 GPM, the Super Max 8950C-840 is more than sufficient for quick, effortless pavement cleaning.

For concrete cleaning purposes, cold water pressure washers such as the Super Max 8950C-840 are cheaper, simpler to use and lighter than their hot-water counterparts. This is because cold water power washers do not include the heavy heating systems necessary to heat the water like hot water washers use. Cold water pressure washer cost as much as $1,000 less than hot water pressure washers. They also weigh less – as much as 100 pounds less, on average.

The Best Way to Clean Concrete with a Pressure Washer

Stains and grime stick out like a sore thumb, making concrete look old and dirty. Breathe new life into your concrete by cleaning it with the Super Max 8950C-840. Here’s how.

Step 1: Divide the work area. Divide the area to be cleaned into smaller sections. This will prevent you from washing an area you’ve already cleaned.

Step 2: Apply a detergent. Use the 8950C-840’s chemical injection feature to put down a layer of detergent that will dissolve stains and loosen grime from the concrete. Allow it to sit for 5 to 10 minutes. Reapply the soapy, detergent layer if it starts to dry.

Step 3: Rinse thoroughly. After allowing the detergent to sit and do its job, use a general high-pressure nozzle (the 25º one that comes standard with this machine is perfect) to rinse it away. If an area is particularly stained, you may need to reapply the detergent and repeat the process a couple more times.

Turbo Nozzles – Sometimes, repeating the process just isn’t enough for getting rid of extra stubborn grease and grime. In this case, a turbo nozzle decreases your cleaning time by as much as 40 percent. It directs the water stream in a more direct pattern giving it more power to blast away stains. The Super Max 8950C-840 comes standard with a 0º turbo nozzle. To use a turbo nozzle safely, always keep it in motion while in use, and never point it toward any animals or people.

Another type of turbo nozzle – a rotary turbo nozzle – increases cleaning power even more by directing the water stream in constant circular motion. This type of nozzle is not included with the Super Max 8950C-840, but the standard wand can accommodate one.

When it comes to multi-purpose industrial cleaning, the Super Max 8950C-840 is the perfect cold water pressure washer for a variety of application. Designed with portability, durability and power in mind, this gasoline-powered pressure washer allows you to tackle each task with the power and efficiency you need to get the job done right.

Contact Daimer today at 1-877-482-1009 to inquire about optional dual gun, wet sandblasting and hot water capabilities of the Super Max 8950C-840. We look forward to helping you get a pressure washer suitable for all your commercial and industrial needs.


 

Comments

 
Before You Go
Sign Up For Our Email Newsletter

so That You Can Get Discount Coupons, Promos, Company News and More!

 
  Contact Us
You will be unable to submit the form unless you turn your javascript on.
xx
close

Before You Go

Help us understand why you're leaving

Did you find what you were looking for?
What could we improve to earn your business?

   I am not leaving