The Super Max ® 15200 is a stationary, tri-mode steam natural gas, propane or oil heated fired steam electric pressure washer that can be independently used as a cold water pressure washer, hot water pressure washer, or steam pressure washer. The Super Max ® 15200 offers a flow rate of 2 GPM at a pressure of 1000 psi. High pressure injection allows for the addition of cleaning solutions to enhance cleaning power for specific applications. This electric powered pressure washer is available with:
no.1 or no. 2 heating oil, diesel, kerosene, natural gas, or propane heating and two gun operation is an available option. This introductory 15000 series pressure washer is ideal for industrial applications requiring a powerful pressure washer as a stationary addition to their facilities, but that do not need the higher flow rates and pressure afforded by other machines.
Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 400V, 415V, 440V, 480V, and 600V; two and three phase; 50 or 60 Hz. Please contact us for pricing.
Commercial/Industrial
Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited)
Product Specifications
Pressure
1000 psi
Adjustable Pressure
N/A
Flow Rate
2 GPM
Standard Power Method
electric: 120V, single phase, 60 Hz
Optional Power Methods
(call for pricing) 120V, single phase, 50 Hz; 230V, single phase, 50 or 60 Hz; 230V three phase, 50 or 60 Hz; & 440V, three phase, 50 or 60 Hz
Motor Size
heavy duty 1.5 HP - NEMA
Gasoline Capacity
N/A
Ignition System
electronic direct spark
Power cords
1
Heating Method
no.1 or no. 2 heating oil; diesel; kerosene; natural gas (requires natural gas line); or propane (customer provides vapor withdrawal cylinder)
Heating Fuel Capacity
9 gallons (heating oil, kerosene, or diesel)
Temperature Options
cold, hot, wet steam
Temperature Hot
180 º F - 220 º F
Steam Temperature
up to 330º F
Heater Exchange Coil
heavy duty schedule 80 heating coil
Heater Response Time
converts cold water to hot water in approximately 30 seconds
Operating Time
continuous use
Pump Drive Method
direct drive
Chemical Infusion
yes, high pressure injection
Wand Included
durable 3' trigger wand with quick disconnect
Nozzles Standard
0º (blast), 15º, 25º, 40º, steam nozzles
Pressure Hose
50' high pressure steam hose
Pressure Hose Options
additional/customizable lengths available
Dimensions
52"w. x 23"d. x 50"h.
Weight
950 lbs
Housing
powder-coated steel, high gloss, chip/chemical resistant
