(Clone) (Clone) SM-12200-216
VoltageHeating FuelPrice Call to order
230V, single phase, 60HzPropane$9,197.00 1-800-471-7157

The Super Max™ 12200 WS is a propane heated, tri-mode, industrial electric wet sandblaster pressure washer.

  • Pressure: 2000 PSI
  • Flow Rate: 4 GPM
  • Temperature: up to 330º F
  • Standard Power Method: electric: 220V-240V, single phase, 60 Hz

Have a question about this item?
Contact us and a sales representative would be glad to help!



Price excludes freight.
Free Skid Configuration for Trailer Mounting

View This Video - Discover Daimer's Absolutely

Outstanding Wet Steam Degreasing Capabilities

Loading the player…


truck mouint pressure washer, steam pressure washer

The Super Max 12200 WS is a powerful electric wet sand blaster pressure washer offering a high flow rate (4 GPM) and pressure (2000 psi) for a wide variety of industrial and commercial pressure washing applications. This machine can function independently as a cold water, hot water, and steam pressure washer with steam temperatures reaching up to 330ºF.

Standard with the Super Max™ 12200 WS wet sand blaster pressure washer machine is Daimer's unique and powerful wet sandblasting system that effectively and efficiently removes rust, corrosion, paint layers or heavy deposits from a variety of metal surfaces, bringing the surface back to shiny bare metal. For use as a wet sand blaster, this pressure washer must be used in cold water mode.

The wet sandblasting system consists of a specialized venturi head, 15' flexible sand pickup tube, and sand point for drawing sand into the hose directly from the container. The suction from the head carries the sand grit through the pickup tube and into the head where it mixes with high-pressure washer. The high-pressure water and sand grit exit the head through a special round nozzle and are pushed across the surface to remove layers for an even deeper clean. The wet sand blaster pressure washers can be used with a range of sand grit sizes and media, including baking soda and small plastic pellets.

Designed for spot removal of corrosion, rust, and other materials from metal surfaces, Daimer's wet sandblasting machines feature a 1 1/2" width spray pattern.

The Super Max™ 12200 WS can also be purchased with trailer mounting and two gun operation configurations.

Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 415V, 440-480V, and 575V; single and three phase; 50 or 60 Hz. Please contact us for pricing.

Product Specifications

Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited)
Pressure2000 psi
Flow Rate4 GPM
Temp. Optionscold, hot, wet steam
Steam Temp.up to 330º F
Hot Water Temp.180ºF - 210ºF
Standard Power Methodelectric: 220V-240V, single phase, 60 Hz
Optional Power Methods(call for pricing) 220V-240V, single phase, 50 Hz; 220V-240V three phase, 50 or 60 Hz; & 440V, three phase, 50 or 60 Hz
Motor Sizeheavy duty 5.0 HP - NEMA
Minimum Generator Size15000 watts
Gasoline/Diesel Fuel CapacityN/A
Ignition Systemelectronic direct spark
Power Cords1
Heating Methodpropane
Heating Fuel Capacity50 lb. empty tank included
Heater Exchange Coilheavy duty schedule 80 heating coil
Heater Response Timeconverts cold to hot water in approximately 30 seconds
Operating Timecontinuous use
Pump Drive Methodshaft drive
Chemical Infusionyes, high pressure injection
Wand Includeddurable 3' trigger wand with quick disconnect
Nozzles Standard0º (blast), 15º, 25º, 40º, steam nozzles
Pressure Hose50' high pressure steam hose
Pressure Hose Optionsadditional/customizable lengths available
Dimensions48"w. x 41"d. x 50"h.
Weight900 lbs
Housingsteel - powder-coated, high gloss, chip/chemical resistant
Colorred and white
Phosphatizing SystemN/A- see Super Max 12200 AF
Acid/Phosphate Chemical FeedN/A
Trailer Mountwheels removed - same price
Multi-Gun Operationoptional - call for pricing
Wall MountN/A
Wet Sandblasting Systemyes

Parts List


Standard Parts / Quantity

3' Durable Trigger Wand with Quick Disconnect 1
0º (Blast) Nozzle (not shown) 1
15º Nozzle (not shown) 1
25º Nozzle (not shown) 1
40º Nozzle (not shown) 1
Steam Nozzle (not shown) 1
Venturi Nozzle (not shown) 1
50' High Pressure Steam Hose (not shown) 1
Sand Tube (not shown) 1
Pick Up Probe (not shown) 1



  Contact Us
Before You Go
Sign Up For Our Email Newsletter

so That You Can Get Discount Coupons, Promos, Company News and More!


Before You Go

Help us understand why you're leaving

Did you find what you were looking for?
What could we improve to earn your business?

   I am not leaving