(Clone) (Clone) SM-15200-116DH
VoltageHeating FuelPrice Call to order
120V, 60HzNatural Gas$11,235.00 1-800-471-7157

The Super Max™ 15200 WS is a stationary electric industrial wet sandblaster pressure washer.

  • Pressure: 1000 PSI
  • Flow Rate: 2 GPM
  • Temperature: up to 330º F
  • Standard Power Method: electric: 110V-120V, single phase, 60 Hz

Have a question about this item?
Contact us and a sales representative would be glad to help!




Price excludes freight.

View This Video - Discover Daimer's Absolutely

Outstanding Wet Steam Degreasing Capabilities

Loading the player…


pressure washer, pressure washers

The Super Max™ 15200 WS is a stationary, industrial, electric wet sand blaster pressure washer offering a pressure of 1000 psi and flow rate of 2 GPM and can be heated by propane or natural gas. This versatile pressure washer machine can be used independently as a cold water, hot water, and steam pressure washer reaching temperatures of 330ºF.

Adding to the multi-use functionality of the 15200 WS is Daimer's wet sand blaster system that comes standard on all Super Max® WS pressure washer machines. The wet sand blaster pressure washer provides benefits above and beyond compressed air sandblasting as it is much safer to use and does not require users to wear protective clothing. For use as a wet sand blaster, this pressure washer must be used in cold water mode. Using the wet sand blaster provides added power to remove rust, corrosion, paint layers or heavy deposits form a variety of metal surfaces, revealing shiny bare metal. Daimer's wet sandblaster machines feature a 1 1/2" spray pattern, ideal for spot removal of corrosion, rust, and other materials from metal surfaces.

To do so, the 15200 WS uses a metal sand point to draw the sand grit directly from the container into the 15' flexible sand pickup tube that sucks the sand up into the special venturi head where it is mixed with high-pressure water. The high-pressure water and sand exits the head through the special round nozzle and can be controlled through the proportioning valve on the head.

The Super Max™ 15200 WS wet sand blaster pressure washer is the ideal solution for industrial facilities requiring a permanent pressure washer addition that has immense wet sandblasting capabilities. Additionally, the 15200 WS can be purchased with optional two gun operation.

Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 415V, 440-480V, and 575V; single and three phase; 50 or 60 Hz. Please contact us for pricing.

Product Specifications

Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited)
Pressure1000 psi
Flow Rate2 GPM
Temp. Optionscold, hot, wet steam
Steam Temp.up to 330º F
Hot Water Temp.180 º F - 210 º F
Standard Power Methodelectric: 110V-120V, single phase, 60 Hz
Optional Power Methods(call for pricing) 110V-120V, single phase, 50 Hz; 220V-240V, single phase, 50 or 60 Hz; 220V-240V three phase, 50 or 60 Hz; & 440V, three phase, 50 or 60 Hz
Motor Sizeheavy duty 1.5 HP - NEMA
Minimum Generator SizeN/A
Gasoline/Diesel Fuel CapacityN/A
Ignition Systemelectronic direct spark
Power Cords1
Heating Methodnatural gas (requires natural gas line); or propane (customer provides vapor withdrawal cylinder) OPTIONAL natural gas or propane (OPTIONAL no.1 or no. 2 heating oil; diesel or kerosene - CALL FOR PRICING)
Heating Fuel Capacity9 gallons for OPTIONAL (heating oil, kerosene, or diesel)
Heater Exchange Coilheavy duty schedule 80 heating coil
Heater Response Timeconverts cold water to hot water in approximately 30 seconds
Operating Timecontinuous use
Pump Drive Methoddirect drive
Chemical Infusionyes, high pressure injection
Wand Includeddurable 3' trigger wand with quick disconnect
Nozzles Standard0º (blast), 15º, 25º, 40º, steam nozzles
Pressure Hose50' high pressure steam hose
Pressure Hose Optionsadditional/customizable lengths available
Dimensions52"w. x 23"d. x 50"h.
Weight950 lbs
Housingpowder-coated steel, high gloss, chip/chemical resistant
Colorred and white
Phosphatizing SystemN/A- see Super Max 15200 AF
Acid/Phosphate Chemical FeedN/A
Trailer MountN/A
Multi-Gun Operationoptional - call for pricing
Wall MountN/A
Wet Sandblasting Systemyes

Parts List


Standard Parts / Quantity

3' Durable Trigger Wand with Quick Disconnect 1
0º (Blast) Nozzle (not shown) 1
15º Nozzle (not shown) 1
25º Nozzle (not shown) 1
40º Nozzle (not shown) 1
Steam Nozzle (not shown) 1
Venturi Nozzle (not shown) 1
50' High Pressure Steam Hose (not shown) 1
Sand Tube (not shown) 1
Pick Up Probe (not shown) 1



  Contact Us
Before You Go
Sign Up For Our Email Newsletter

so That You Can Get Discount Coupons, Promos, Company News and More!


Before You Go

Help us understand why you're leaving

Did you find what you were looking for?
What could we improve to earn your business?

   I am not leaving