(Clone) SM-12300-236
VoltageHeating FuelPrice Call to order
230V, three phase, 60HzPropane$15,134.00 1-800-471-7157

The Super Max 12300 WS wet sandblaster pressure washer capabilities allow this industrial commercial electric pressure washer to be used independently as a cold water, hot water, or steam pressure washer reaching temperatures up to 330°F. Daimer's wet sand blaster pressure washers quickly and effectively remove rust, corrosion, paint layers and heavy deposits from a variety of metal surfaces like all Super Max™ WS wet sandblasting pressure washer machines, but with a higher pressure level (3000 psi) and flow rate (5 GPM).

Have a question about this item?
Contact us and a sales representative would be glad to help!


Price excludes freight.
Free Skid Configuration for Trailer Mounting

View This Video - Discover Daimer's Absolutely

Outstanding Wet Steam Degreasing Capabilities

Loading the player…


truck mouint pressure washer, steam pressure washer

The Super Max™ 12300 WS is one of the most powerful , industrial commercial, electric, wet sand blaster pressure offered by Daimer. This robust machine boasts a high pressure of 3000 psi and flow rate of 5 GPM, with high steam temperatures reaching 330ºF. This adaptable pressure washer machine can be used for a variety of applications as it can operate individually as a cold water, hot water, or steam pressure washer.

Adding to the versatility of this ultra-powerful pressure washer equipment is the addition of Daimer's unique and effective wet sandblasting system. For use as a wet sand blaster, this pressure washer must be used in cold water mode. This system includes a special venturi head for suction and the mixing of high-pressure water and sand grit, a 15' sand pick up tube to carry the sand to the head, and a metal sand point which draws sand into the system directly from the container. Users can adjust the water/sand ratio through the proportioning valve. All of these parts are made of the highest quality components.

While normal pressure washers function by just removing contaminants from a surface, the Super Max™ 12300 WS wet sand blaster pressure washer can be used to remove a layer of material from a surface to eliminate rust, corrosion, paint layers or heavy deposits to bring the surface down to shiny bare metal. Wet sandblasting is a more cost effective and safe method than sandblasting using compressed air. However, because it is slower, wet sandblasting is ideal for small area spot cleaning. Daimer's wet sandblaster machines feature a 1 1/2" width spray pattern., ideal for spot removal of corrosion, rust, and other materials from metal surfaces.

All Daimer's Super Max™ 12000 WS series wet sand blaster pressure washers can also be purchased with trailer mounting and two gun operation configurations.

Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 415V, 440-480V, and 575V; single and three phase; 50 or 60 Hz. Please contact us for pricing.

Product Specifications

Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited)
Pressure3000 psi
Flow Rate5 GPM
Temp. Optionscold, hot, wet steam
Steam Temp.up to 330ºF
Hot Water Temp.180ºF - 210ºF
Standard Power Methodelectric: 220V-240V, three phase, 60 Hz
Optional Power Methods(call for pricing) 220V-240V three phase, 50 or 60 Hz; & 440V, three phase, 50 or 60 Hz
Motor Sizeheavy duty 10.0 HP - NEMA
Minimum Generator SizeContact Daimer
Gasoline/Diesel Fuel CapacityN/A
Ignition Systemelectronic direct spark
Power Cords1
Heating Methodpropane (LPG)
Heating Fuel Capacity50 lb. empty tank included
Heater Exchange Coilheavy duty schedule 80 heating coil
Heater Response Timeconverts cold to hold water in approximately 30 seconds
Operating Timecontinuous use
Pump Drive Methodshaft drive
Chemical Infusionyes, high pressure injection
Wand Includeddurable 3' trigger wand with quick disconnect
Nozzles Standard0º (blast), 15º, 25º, 40º, steam nozzles
Pressure Hose50' high pressure steam hose
Pressure Hose Optionsadditional/customizable lengths available
Dimensions48"w. x 41"d. x 58"h.
Weight900 lbs
Housingsteel - powder-coated, high gloss, chip/chemical resistant
Colorred and white
Phosphatizing SystemN/A- see Super Max 12300 AF
Acid/Phosphate Chemical FeedN/A
Trailer Mountwheels removed - same price
Multi-Gun Operationoptional - call for pricing
Wall MountN/A
Wet Sandblasting Systemyes

Parts List


Standard Parts / Quantity

3' Durable Trigger Wand with Quick Disconnect 1
0º (Blast) Nozzle (not shown) 1
15º Nozzle (not shown) 1
25º Nozzle (not shown) 1
40º Nozzle (not shown) 1
Steam Nozzle (not shown) 1
Venturi Nozzle (not shown) 1
50' High Pressure Steam Hose (not shown) 1
Sand Tube (not shown) 1
Pick Up Probe (not shown) 1



Eliminating Graffiti With Power Wash Systems

It is a fact that there are lots of graffiti drawings and writings powerful enough to capture the attention of viewers. However, graffiti art can also evoke displeasure and annoyance, if the canvas happens to be the public walls or high-traffic buildings. Concrete surfaces are exceptionally porous and quickly absorb the spray paint used for graffiti. This makes the removal of graffiti from concrete surfaces extremely difficult. When scrubbing and washing no longer offer the results you expect, switch to new pressure washers.

Cleaning experts recommend using industrial pressure washers with high pressure levels to manage demanding applications. However, when your requirements are extremely challenging, as in the case of graffiti removal, it is best to choose gas pressure washers equipped with wet sandblasting functions. The Super Max™ 12300 WS from Daimer® is ultra-powerful pressure washer equipment featuring flow rates of 5 gpm and pressure levels of 3000 psi. Powered by a 10.0 HP NEMA engine, these tri-mode electric pressure washers generate hot water, cold water, or wet steam as per your requirements.

The wet sandblaster system in hot water pressure washers, such as the Super Max™ 12300 WS, is just what you need to clean off graffiti from concrete surfaces. In the cold water mode, the wet sandblaster function in the pressure washer mixes sand grit with highly pressurized water. The mixture then ejects through the venturi head, efficiently removing all traces of spray paint, rust, and corrosion from concrete walls. The pressure washer is available with an optional two-gun configuration.

  Contact Us
Before You Go
Sign Up For Our Email Newsletter

so That You Can Get Discount Coupons, Promos, Company News and More!


Before You Go

Help us understand why you're leaving

Did you find what you were looking for?
What could we improve to earn your business?

   I am not leaving