- Steam Cleaners
- Carpet Cleaners
- Pressure Washers
- Auto Detailing
- Floor/Hard Surface
- Tile Cleaning Machines
- Gum Removal
Hot water electric water pressure washers deliver steam output at very high temperatures, and can clean the most stubborn of debris from hard surfaces in a flash. A hot water pressure washer is the perfect cleaning machine for difficult tasks, such as removing oil stains and degreasing. The best pressure washer works at an optimum efficiency, and with minimal effort.
The Vapor-Flo® 8010 from Daimer is an efficient electric pressure washer, and operates on a heavy-duty 1.0 HP motor. Considered as one of the best pressure washers for commercial and industrial cleaning applications, it delivers a moderate pressure output of up to 1450 psi and emits a low flow rate of 0.4 GPM. It is the perfect hot water pressure washer for cleaning surfaces in an industrial facility requiring low water flow.
The best pressure washer offers both hot and cold water options, and can be used for a variety of industrial cleaning applications. Electric pressure washers are eco-friendly and do not emit fumes. These pressure washers operate more quietly as compared to pressure washers that run on fuel. Cleaning tasks can be completed easily without disturbing the surroundings while using these electric pressure washers.
The Vapor-Flo® 8010 can deliver even better cleaning performance when combined with Eco-Green chemicals. The temperature output from these hot water pressure washers can reach up to 140°F. This easy-to-handle electric pressure washer comes in a powder coated steel casing and does not corrode, or even chip.
The Vapor-Flo® 8010 is an electric pressure washer with a heavy duty 1.0 HP motor. Offering both hot and cold water options, this pressure washer is engineered for commercial and industrial cleaning applications. The moderate pressure level of 1450 psi combined with hot water temperatures up to 140°F allow for effective cleaning, while the low flow rate of 0.4 GPM will not harm equipment or other delicate surfaces.
The powder coated steel casing offers the same protection against chemical corrosion and chipping as the 8010, but does not offer access to the water tank from the top of the machine.
Operators may consider enhancing the cleaning power of these pressure washers through the use of Eco-Green® chemicals, via the machine's siphon type standard/foam lance chemical injection. Options include adjustable pressure, assorted power methods, and custom hose lengths.
Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 415V, 440-480V, and 575V; single and three phase; 50 or 60 Hz. Please contact us for pricing.
Warranty1 year (limited)Water Pump Warranty1 year (limited)Motor/Engine Warranty1 year (limited)
© 2015 DAIMER Industries. All Rights Reserved.