Price excludes freight.
Free Skid Configuration for Trailer Mounting
The Super Max™ 12880 AF is a powerful tri-mode commercial industrial gas pressure washer that offers the same features and power (5 GPM flow rate at a pressure of 3000 psi), as the 12860 AF; however, the Super Max™ 12880 AF is powered by an 18 HP gasoline engine. Like the 12860 AF, the 12880 AF is available with either no.1 no.2 heating oil, diesel, or kerosene heating; two gun operation is also an available option. Additionally, the 12880 AF can be configured with wheels for added mobility if desired.
Standard on all 12000 AF series pressure washers is Daimer's exceptional phosphatizing system for the pre-treatment of metal surfaces to prevent rust and corrosion and to prepare the surfaces for the application of paint primer or powder coating. This phosphatizing system uses downstream injection in which the chemical contacts only the injector, high-pressure hose, trigger gun, wand and nozzle, all of which are easy to protect against corrosive attack. This added to the high quality stainless steel components makes the 12880 AF ideal for a variety of powder coating and other metal pre-treating applications.The included dual lance wand is comprised of heavy-duty stainless steel and features a high-pressure nozzle and low-pressure nozzle. By opening and closing the crossover valve the water flow is directed through either of these nozzles, but not both at the same time.
This unit is ideal for demanding outdoor applications or those without a reliable electric supply. Daimer offers wonderful advantages with its burners over other gas pressure washers in the industry. The 12880 AF gas pressure washer uses a Heavy-Duty 120 Volt A.C. Burner Powered by a Belt Driven Closed Loop A.C. Generator. Other companies offering lower quality gas pressure washers use inexpensive 12 Volt DC Oil Burners, which exhibit a spark intensity reduction when the battery is less than 100%. Over time, this reduction creates a buildup of carbon and soot on the electrodes, fuel nozzle, combustion chamber and heat exchanger coil, all of which further impairs combustion efficiency. Batteries do not always run at 100% charge! Frequent engine starts and periods of down time will keep most batteries at less than full charge, and 12 volt oil burners are prone to failure! Daimer's burners and components for all of our hot water pressure washers are the best in the industry that allow Super Max pressure washer machines to last up to and beyond 20 years.
Daimer offers pressure washers in a variety of power configurations for worldwide requirements. The following are available: 110-120V, 208V, 220-240V, 380V, 415V, 440-480V, and 575V; single and three phase; 50 or 60 Hz. Please contact us for pricing.
Warranty1 year (limited)Water Pump Warranty5 years (limited)Motor/Engine Warranty2 years (limited) |
|
Dual Lance Wand with crossover valve | 1 |
0º (Blast) Nozzle (not shown) | 1 |
15º Nozzle (not shown) | 1 |
25º Nozzle (not shown) | 1 |
40º Nozzle (not shown) | 1 |
50' High Pressure Hose (not shown) | 1 |
The floors in industrial settings have to be maintained well with pressure washers to ensure smooth workflow. Industrial areas generally feature lots of machinery and equipment that need to be degreased and cleaned on a regular basis. Logistics trucks and moving machines keep shuttling in and out all day, leaving tire marks, grease, mud and grime all over the floors and driveways. To clean off all this mess in unbelievable short periods and without exerting lots of effort, it is imperative to turn to industrial pressure washers.
One of the most important reasons why industrial areas must be maintained with commercial pressure washers is that the excellent cleaning results will definitely impress potential clients. If you manage a food processing plant and use electric pressure washers to degrease and clean the entire area, your clients will obviously be pleased by your high standards of cleanliness and hygiene.
If you are looking for gas pressure washers for use in industrial zones, check out the Super Max™ 12880 AF from Daimer®. This pressure washer generates cold water or hot water at pressure levels of 3000 psi and flow rates of 5 gpm. These hot water pressure washers eject hot water at temperatures as high as 180ºF, to instantly dissolve tough grease and dirt buildup from different surfaces.
Pressure washers, such as the Super Max™ 12880 AF, also feature an effective phosphatizing system to pre-treat metal surfaces and eliminate rust and corrosion. Powered by a 18.0 HP gasoline engine, this pressure washer also comes with optional multi-gun operation.
© 2023 DAIMER Industries. All Rights Reserved.
so That You Can Get Discount Coupons, Promos, Company News and More!